2005-381 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Integrated Shipbuilding Environment (ISE)
2007-378 2007, 2008, 2009 SHIPWAY 2.0: Developing Lean Best Practice for Business and Information Processes
2008-601 2008, 2009, 2010, 2011, 2012, 2013 Improved Methods for Generation of Full-Ship Simulation/Analysis Models II
2000-115 1999, 2000, 2001, 2002, 2003 Autogen: Automatic Generation of Control Programs for Robotic Welding
2007-374 2007, 2008 Gas Metal Arc Welding (GMAW) and Distortion Mitigation for Thin Steel and Aluminum
2008-396 2008, 2009, 2010, 2011, 2012 Manufacturing and Assembly Technology for Low-Cost Pultruded Composites
2010-626 2010, 2011, 2012 Weld Shrinkage and Distortion Allowance Data Model for Neat Construction Ship Design Engineering
2014-401 2013 Benefit Assessment and Development of Standard Drawing for Interface to Flexible Infrastructure (FI) Track Systems
2009-345 2008 Risk Reduction in Primary Scantling Design and Approval Process for Structurally Complex Vessels
2010-386 2010 Analysis of Injuries and Fatalities in Shipbuilding Industry Associated with “Struck By”, “Struck Against” or “Caught In” Incidents
2011-451 2010 Response to EPA’s Request for Comments on “Emissions Standards for Shipbuilding & Ship Repair” Rule
2010-389 2010 Implementation of Recently Generated Emission Factors at the Federal, State and Local Level
2014-410 2014 Develop a Data Management Application (Emissions Tracker) to Reduce Labor and Increase Accuracy in the Regulatory Reporting of Environmental Emissions
2010-385 2010 Study to Determine the Level of Salt Mitigation as Related to the Accuracy of the Measurement and Cost Benefits
2011-426 2011 Evaluation of “Spot and Sweep” Blasting as a Cost Effective Method of Underwater and Outer Hull Surface Preparation
2001-327 2001 A Preliminary Study of Double-Sided Arc Welding Process in Ship Structure Manufacturing
2011-420 2011 Green Fastening Technologies to Reduce Operating Costs and Boost Quality and Productivity
2015-431 2015 Standardizing Warfare System Interfaces to Reduce Integration Costs During Ship Construction, Modernization, and Maintenance
2015-467 2015 Optimizing the Design/Manufacturing for Flexible Interface Adapters with a Focus on Cost, Weight and Reusability
2015-468 2015 Ship Spec Review to Identify Technical Gaps between Flexible Infrastructure and Ship Spec Requirements
2011-460 2011, 2012, 2013 First Time Quality, NDE, and Fitness for Service Technology for Friction Stir Welding and Manufacturing Aluminum Panels for Ships
2015-406 2014, 2015, 2016 Development and Applications of Standard Hull, Mechanical and Electrical Modules to Increase Flexibility in Ship Design Using DFA Principles
2012-462 2012 Evaluation of Model Based Engineering (MBE) and Advanced Forming Technology for Complex Hull Manufacturing
2005-333-R17 2013 Production Information Standards for Incorporating Lifting Lugs and Backup Structure
2014-423 2014 Validation of Analysis Methods for Padeye Attachment Under Dynamic Loading through Destructive Testing
2014-413 2014 Control Technology Comparison for Removing Heavy Metals from Shipyard Storm Water Runoff
2005-339-R40 2016 Develop Process for Virtual Shelf, NSRP Common Parts Catalog and NNS Parts Catalog System Data Integration
2005-341A-R43 2016 Deep Dive on Vaneaxial Fans Intended for Naval Shipboard Use NSRP Commonality Working Group and NAVSEA
2016-443 2016 Advanced Mobile Test Platform to Accelerate the Installation of Electrical Harnesses and Support Sustainment of Electrical Systems in Ships
2016-433 2016 Reduction of Total Ownership Cost (R-TOC) through Application of Design for Maintenance (DFM) Solutions
2016-434 2016 Mitigation of Stress Corrosion Cracking, Cavitation Erosion & Forming Complex Shapes Using Laser Peening
2016-436 2015, 2016, 2017 Development of HiDep Welding Process for Butt and T-Fillet Joints Implementation Phase
2017-443 2017 Ship Structural Design Optimization for Improved Producibility and Enhanced Life-Cycle Performance
2005-341A-053 2017 Providing Shipbuilding Suppliers with Digital Design and Manufacturing Information
2005-341A-050 2017 Development of a Requirements Framework for the Fabrication and Inspection of Navy Parts using Additive Manufacturing
2017-423 2017 Advanced Composite False-Deck Material Systems for Rapid Modular Compartment Reconfiguration
2017-419 2017 Mechanical Property and Fabrication Cost Comparison of Purchased HFRW Structural Shapes vs GMAW Fabricated Structural Shapes
2017-425 2017 Computer Aided Robotics Welding (CAR-W) Production Scanning & Multi-Robot Capability Enhancements
2017-426 2017 HiDep Process for Fabrication of Low-Weight T-Stiffeners with Near-Zero Weld Distortion
2005-333-032 2018 Application Analysis of Equalizing Load Lifting Bars to Reduce Distortion Control Backup Structure when Lifting and Turning Thin Plate Blocks
2018-421 2018 Evaluation of Efficacy of Self-Sealing Cable Transit Devices for Aluminum Bulkheads and Decks in Non-Watertight Boundaries
2018-427 2018 Cost Model-Based Network Design and Testbed Performance Analysis: Demo of Optical Network Paradigm for Ships’ Flexible Communications Infrastructure
2005-340-036 2018 Thermal Insulating Coatings for (TTP492) Achieving R Value Using Aerogel Filled Coatings for Naval Shipyard Applications
2019-473-001 2019 Advanced Impact Analysis- Potential Changes to Weld Fume Carcinogenicity Designation
2019-376-001 2019, 2020, 2021 Qualification Testing of Insulated Bus Pipe (IBP) for Shipboard Introduction
2019-478-001 2019 Short Course on Dredging Fundamentals for Shipyard Operations & Environmental Sustainability
2018-455-014 2018, 2020 Applications of Targetless Photogrammetry for Facilities and Close Range Metrology
2019-375-004 2019, 2020, 2021 Robotic Arc Directed Energy Deposition Additive Manufacturing for Shipbuilding
2019-376-002 2020 Research & Develop Insulated Bus Pipe (IBP) Standard Interface to Naval Electrical Equipment
2018-455-020 2020, 2021 Minimum Standardized Content to Enable a Navy Digital Enterprise 2018-455-020
2020-302-001 2020, 2021 Advanced Knowledge Provisioning Using Artificial Intelligence (AI) & Augmented Reality (AR) for Ship Repair
2018-454-011 2020 Additive Manufactured Solutions in the Shipyard of Job Aids, Replacement and Part Prototypes
2020-399-001 2020 Validate a Testing Protocol to Establish the Maximum Heat Input for Welding S-1 Series Carbon Steels with Toughness Requirements
2018-455-023 2018, 2020 Extension Basis for 72-inch Physical Open Architecture Enclosure Systems to DDG and CG Ships
2020-303-001 2020, 2022 Advanced Development & Implementation of the High Mobility Manufacturing Robot (HMMR)
2019, 2020, 2021 Onboard Ship Integration of Laser Peening System for Lasting Aluminum Repairs 2019-376-003
2018-455-024 2021 Industry-Wide Collaboration to Address the Navy’s Shipboard Industrial Fire Safety Problem (2018-455-024)
2022-329-001 2021 Shore-Based Additive Manufacturing in Support of Military Sealift Command (2022-329-001)
2019-375-004 2019 Robotic Arc Directed Energy Deposition Additive Manufacturing for Shipbuilding (2019-375-004)
2018-455-023 2020 Extension Basis for 72-inch Physical Open Architecture Enclosure Systems to DDG and CG Ships (2018-455-023)
2022-328-001 2021, 2023 Minimize Work Content in Production and Maintenance and Reduce TOC Using Early-Stage Structural Design Optimization (2022-328-001)
2022-329-002 2022, 2023 Custom and Digitized ABS Rules with Executable Knowledge Packets (2022-329-002)
2019-375-007 2021 Portable Single-Pass Buried Arc Welding of Steel Plate During Ship Erection (2019-375-007)
2019-375-009 2021 Next Generation Double Electrode GMAW Processes for Precision Fillet Welding (2019-375-009)
2018-453-024 2021 Evaluation of Splice-On Connectors and Termini for Shipboard Applications (2018-453-024)
2019-479-002 2021 Development of an Additive Manufacturing Capability for CuNi Seawater Heat Exchangers (2019-479-002)
2018-447-016 2022 Implementation of Press Connect Fitting in Construction of US Navy Ships (2018-447-016)
2018-453-025 2021 Utilizing Ship Product Model Information for Corrosion Control and Coatings (2018-453-025)
2018-453-029 2023, 2024 Development of a Fast Analysis Solver for Welding Sequence Optimization of Ship Structures (2018-453-029)
2018-451-009 2023, 2024 Outlining a Development Plan for the Auto-Identification of Cobot Welding & Cutting Applications within a Digital Ship Model (2018-451-009)
2018-455-030 2023, 2024 Feasibility of Standardizes OSHA Maritime Management Safety Training (2018-455-030)
2019-477-004 2023, 2024 Distributed Temperature Sensing (DTS) Integration into Ship Electrical Plant Monitoring and Controls for Conditions Based Maintenance (2019-477-004)
2019-483-011 2023, 2024 Automated Detailed Planning and Integrated Shipyard Operations with Engineering Data (2019-483-011)
2018-453-030 High-Density Ribbon Fiber Optic Cable & Tooling for Shipboard Installations (2018-453-030)
2019-476-005 2022, 2023 Implementation of SP-18 “Through Spot and Sweep Blast Cleaning for Industrial Coating Maintenance” in Shipyard Construction (2019-476-005)
2018-455-031 2023, 2024 Combat Systems Standard Foundations Qualification and Optimization (2018-455-031)
2018-453-030 2023, 2024 High-Density Ribbon Fiber Optic Cable & Tooling for Shipboard Installations (2018-453-030)